Options; Rotary Engraving Attachment; Rotary Engraving Process - Trotec Speedy 360 Operating Manual

8.9

Options

8.9.1

Rotary engraving attachment

The rotary engraving attachment is used for engraving cylindrical workpieces.
Caution
Damage to electronics.
Inserting or removing the Rotary attachment while the machine is turned on may irreparably damage the
electronics.
Switch off the machine before inserting or removing the Rotary attachment.
Device with cone:
Max. workpiece diameter: 207 mm
Max. workpiece length: 550 mm
Device with cone
8.9.2

Rotary engraving process

1. Create a graphic using the graphics soware.
2. Select the Rotary engraving option from the
menu bar and specify the diameter of the item.
Device with rollers:
Max. workpiece diameter: 96 mm
Max. workpiece length:
Ø ≥ 58 mm = 679 mm,
Ø ≤ 58 mm = 745 mm
Device with rollers
Operation
63