Maintenance Plan; Daily Inspection Of The Safety Circuits - Trotec Speedy 360 Operating Manual

9.3

Maintenance plan

System Components
Checking the safety circuit
Lens,
mirror #4
Mirror #2 and mirror #3
Ultrasonic sensor
(option)
Working table and rulers.
Vent slots of exhaust box.
(inside the machine)
Entire working area.
General cleaning.
Energy Chain x-axis
Vent slots (backside of the
maschine)
Spindles
Cover of the laser source
and housing.
Operate emergency stop
✓ ✓ Check for cleanliness and proper condition, and clean if necessary.
✓ Clean whenever required.
CG Clean and grease
Notice
In order to ensure the maximum availability and lifetime of the system, we recommend that you regularly
check the filter, ventilation and exhaust slots and keep the surrounding area clean. A visual inspection of
the lenses is likewise recommended before switching on the system.
9.4

Daily inspection of the safety circuits

BEFORE STARTING WORK:
Checking the safety switch:
1. Aer initializing, open top cover
–
The LED on the keyboard's Start button should be flashing quickly (2 Hz)
Daily Weekly
✓
✓✓
✓✓
✓✓
✓✓
✓
✓
✓
✓
Half-yearly Yearly
✓✓
✓✓
CG
Maintenance
Chapter
"Daily inspection of the
safety circuits"
"Cleaning the mirrors"
"Cleaning the mirrors"
"Ultrasonic sensor (Sonar
Technology )"
TM
71