Table of Contents
Advertisement
Operation
8.8.1
Sonar Technologie
Caution
If the ultrasonic sensor is heavily soiled, the laser head may be damaged if it therefore hits the material or
the worktable.
Notice
This focusing mode is especially well-suited for all sound-relective materials.
62
TM
1. Make sure that the ultrasonic sensor is cleaned.
2. Select the correct lens in the control soware settings.
3. Move the laser pointer over the workpiece to the surface to be
focused.
4. Simultaneously press the two keys of the working table control
button Z (1) so that the working table automatically moves to the
focus position and the laser beam is focused on the workpiece.
5. Focusing completed and laser processing can begin.
Advertisement
Table of Contents
