Options; Rotary Attachment - Trotec Speedy 100 flexx Operating Manual

Operation
Caution
If the air assist nozzle is adjusted to a 2,5'' lens or bigger, automatic focusing with the light barrier is not
possible. This would lead to a collision of the laser head with the workpiece or with the working table
("head crash").
In this case please use the manual focusing method or use a different position for the air assist nozzle.
The damage of the machine by a collision is excluded from warranty.
8.11

Options

8.11.1

Rotary attachment

The Rotary attachment is used to engrave cylindrical workpieces. Upon selection of the option "Rotary attachment"
in the control soware and entering the diameter of the object to be engraved, the image size will automatically be
automatically adjusted to the diameter of the workpiece to be processed.
Caution
Damage to electronics.
Inserting or removing the Rotary attachment while the machine is turned on may irreparably damage the
electronics.
Switch off the machine before inserting or removing the Rotary attachment.
Rotary attachment with cones:
58