Table of Contents
Advertisement
7
Operation
Warning
Personal injury or damage to property due to improper operation.
Improper operation can lead to serious personal injury or damage to property.
–
Work on the laser machine may only be carried out by authorized and instructed personnel
familiar with the operation of the machine, observing all safety regulations.
7.1
Before commissioning
Check the following points before commissioning:
Completeness and technically flawless condition of the machine and safety devices.
•
Order and cleanliness at the workplace.
•
Cleanliness of optical components (free of dust and dirt).
•
Activated exhaust system.
•
Complete electrical installation.
•
Correct input voltage of the electrical installation.
•
Environmental conditions according to technical specification.
•
Compliance with all laser safety regulations and measures.
•
Fulfill and compliance with all laser safety requirements.
•
If errors or functional deviations should occur during the inspection of the listed points, the machine is not
considered to be safe to operate and must not (no longer) be put into operation until the cause has been
clarified!
If you have any questions, contact our experienced Technical Support in your local area.
7.2
Software
For information on how to use the software, please read the accompanying software manual, which can be
found on the supplied DVD.
7.3
Power On/Off
Notice
In order not to restrict or obstruct the freedom of movement of the mechanics, no objects of any
kind may be located in the machining area.
All safety protection covers have to be fully functional and closed.
ENGLISH (Translation)
Operation
57
Advertisement
Table of Contents
