Table of Contents
Advertisement
Safety
Caution
Lost or damaged warning and safety stickers.
If any warning and safety stickers are lost or damaged, the user is not able identify risks anymore, and
there is danger of injury.
–
Replace lost or damaged labels immediately.
–
Contact your Trotec Laser GmbH dealer for details.
2.6
Safety devices
Warning
Danger from laser beam.
Safety and protection devices that are not installed or are not fully functional can lead to bodily injury and
material damage.
–
Do not remove, modify or deactivate the interlock safety switches or protective covers on the
machine. Safety and protection devices must be fully functional at all times.
–
In case of assumed or presumed damage of safety devices, disconnect the machine from the mains.
–
Damaged safety and protection devices need to be replaced by a Trotec technician immediately.
2.7
Technical protective measures
2.7.1
Main switch
Pressing the main switch on the backside of the machine to disconnect the machine from the mains power supply.
2.7.2
Key switch
Turning the key switch counterclockwise powers off the motor, laser source and electric system. Through the key switch,
operation by non-authorized personnel can be prevented.
2.7.3
Emergency stop button
Pressing the emergency stop button immediately switches off the circuit.
The laser beam is interrupted and all movements are stopped.
The task of the emergency stop switch is:
20
Advertisement
Table of Contents
