Applicable Safety Regulations - Trotec Speedy 360 fiber Operating Manual

Service operation
Service activities may be carried out only by authorized, trained service technicians. If side panels as well as
covers get removed and safety devices get bypassed, it can lead to direct and indirect scattered radiation.
The service operation is therefore declared as laser class 4 (US: class IV) and proper precautions need to be
taken (see "Laser classification").
2.1.6

Applicable safety regulations

The following directives and guidelines must be observed to avoid hazards when operating Trotec laser
systems:
Guidelines/Regulations
2006/42/EC
2014/30/EU
Applied harmonized standards
EN ISO 12100:2011-03
IEC 60825-1:2014,
EN 60825-4:2011
IEC 60204-1:2005
ISO/DIS 11553-1:2009-03
IEC 61000-6-4:2007-02
ISO 13857:2008
EN 55011+A1:2016-05
ENGLISH (Translation)
EC Machinery Directive
EMC Guideline
Safety of machinery - General principles for design - Risk assessment and
risk reduction.
Safety of laser products - Part 1: Equipment classification and requirements.
Safety of machinery - Electrical equipment of machines - Part 1: General
requirements.
Safety of machinery - Laser processing machines - Part 1: General safety
requirements.
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards -
Emission standard for industrial environments.
Safety of machinery - Safety distances to prevent hazard zones being
reached by upper and lower limps.
Industrial, scientific and medical equipment - Radio-frequency disturbance
characteristics - Limits and methods of measurement.
Safety
15