G.703 Interface Options For Model 7976 - Paradyne 7974 User Manual

G.703 Interface Options for Model 7976

For G.703 Interface Options, refer to
Model
selection sequence:
Table A-7. G.703 Interface Options for Model 7976 (1 of 2)
7900-A2-GB21-20
7976. To access the G.703 Interface Options screen, follow this menu
Main Menu Configuration
main/config/G.703
G.703 INTERFACE OPTIONS
Framing:
Line Coding:
Line Framing:
Time Slot 16:
Send (AIS) on Network Failure:
Primary Clock Source:
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
Framing
Possible Settings: Framed, Unframed
Default Setting: Framed
Specifies whether G.704 framing is used for the G.703 interface.
Framed – The unit conforms to G.704 framing.
Unframed – G.704 framing is disabled.
Line Coding
Possible Settings: AMI, HDB3
Default Setting: HDB3
Specifies the line coding format to be used by the G.703 interface.
AMI – Indicates the line coding format used by the G.703 interface is Alternate Mark
Inversion (AMI).
HDB3 – Indicates the line coding format used by the G.703 interface is HDB3.
December 2001
Table A-7, G.703 Interface Options for
Current Configuration G.703
Framed
HDB3
noCRC4
Signaling
Enable
G703
A. Configuration Options
Model: 7976
MainMenu Exit
A-13