About This Guide - Paradyne HotWire 7985 User Manual

About This Guide

Document Purpose and Intended Audience
Document Summary
7985-A2-GB20-00
This guide contains information needed to set up, configure, and operate the
Hotwire Model 7985 Multirate/High-bit-rate Digital Subscriber Line (M/HDSL)
Standalone Termination Unit and is intended for installers and operators.
Section Description
Chapter 1 About the Model 7985 Standalone Termination Unit.
Describes the Model 7985 Termination Unit's features and
capabilities.
Using the Asynchronous Terminal Interface. Provides
Chapter 2
instructions for accessing the user interface and navigating
through the screens.
Chapter 3 Initial Startup and Configuration. Provides procedures for
setting up the user interface and configuration steps.
Chapter 4 Monitoring the Unit. Describes using the LEDs, status, and
network statistics to monitor the unit.
Chapter 5 Testing. Provides information about available tests and test
setup.
Chapter 6 Messages and Troubleshooting. Provides information on
SNMP traps, device messages, and troubleshooting.
Chapter 7 Security. Presents procedures for creating a login, setting
the effective access levels, and controlling SNMP access.
Chapter 8 IP Addressing. Provides information and examples
regarding IP addresses.
October 1998
v