2. Using the Asynchronous Terminal Interface
Initiating an ATI Session
The Main Menu screen is displayed unless a login ID and password is required or
the ATI is already in use.
If the ATI is already in use, you will see:
T
T
If security is enabled on the unit and you used Telnet to access it directly (you did
not log in through the DSLAM management card), the system prompts you for a
login ID and password.
2-2
A connection refused or connection failed message (if you are
using a Telnet session), or
The IP address of the other user (if you are using the Management Serial
port).
Login
Login ID:
Enter Password:
--------------------------------------------------------------------------------
Ctrl-a to access these functions
December 2001
LOGIN
Model: 797x
Exit
7900-A2-GB21-20