Tests that affect the enterpriseTestStart and enterpriseTestStop traps and the
variable bindings depend on the interface. The specific tests and variable bindings
are described in the following table:
7900-A2-GB21-20
enterpriseTestStart/Stop
Interface
variable bindings
T
DSL Network
T
T
T
T
December 2001
B. Standards Compliance for SNMP Traps
ifIndex (RFC 1573)
ifAdminStatus (RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
ifTestType (RFC 1573)
The following objects
control tests in
SNMP-managed devices:
– noTest(0) – Stops the
test in progress.
– testLoopLLB(4) –
Initiates a Local
Loopback.
– testSendMon511(6) –
Initiates a Send and
Monitor 511 test.
– testSendLLBUp(7) –
Initiates an LLB Up
message to the remote
unit.
– testSendLLBDown(8) –
Initiates an LLB Down
message to the remote
unit.
Possible Cause
T
enterpriseTestStart – Any
one of the following tests is
active on the interface:
– Line Loopback
– Remote Line Loopback
– Send and Monitor 511
T
enterpriseTestStop – No
tests currently running on the
interface.
B-7