Communication Port
For Communication Port Options, refer to
To access the Communication Port screen, follow this menu selection sequence:
When Port Use is set to Terminal, the following screen appears:
When Port Use is set to Net Link, the following screen appears:
7900-A2-GB21-20
Main Menu
Configuration
main/config/com
Port Use:
Port Type:
Data Rate (Kbps):
Character Length:
Parity:
Stop Bits:
Ignore Control Leads:
Login Required:
Port Access Level:
Inactivity Timeout:
Disconnect Time (Minutes):
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
main/config/com
Port Use:
Port Type:
Data Rate (Kbps):
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
December 2001
Table A-9, Communication Port
Current Configuration
COMMUNICATION PORT OPTIONS
Terminal
Asynchronous
9.6
8
None
1
Enable
Disable
Administrator
Enable
5
COMMUNICATION PORT OPTIONS
Net Link
Synchronous
9.6
A. Configuration Options
Options.
Communication Port
Model: 797x
MainMenu
Exit
Model: 797x
MainMenu
Exit
A-17