SYNC Data Port Tests (Model 7975)
To access the SYNC Data Port Tests screen, follow this menu selection sequence:
Use the Command column to start or stop a test. When the Status column shows
that a test is Inactive, Start is displayed; when a test is Active, Stop is displayed.
Position the cursor at the desired Start or Stop command and press Enter. The
Results column displays the test duration.
7900-A2-GB21-20
Main Menu
Test
SYNC Data Port Tests
main/test/data
Test
--------------------------------------------------------------------------------
Local Loopbacks
Data Terminal Loopback:
Data Channel Loopback:
Repeater Loopback:
Remote Loopbacks
Send Remote DCLB:
Down
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
December 2001
SYNC DATA PORT TESTS
Command
Status
Start
Inactive
Start
Inactive
Start
Inactive
Send
Inactive
8. Testing
Model: 7975
Results
00:00:00
00:00:00
00:00:00
00:00:00
MainMenu
Exit
8-9