Paradyne 7974 User Manual page 144

B. Standards Compliance for SNMP Traps
B-8
enterpriseTestStart/Stop
Interface variable bindings
T
DSX-1 or G.703
T
T
T
T
T
EIA-530-A
T
T
T
T
December 2001
ifIndex (RFC 1573)
ifAdminStatus (RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
ifTestType (RFC 1573)
The following objects
control tests in
SNMP-managed devices:
– noTest(0) – Stops the
test in progress.
– testLoopDTLB(3) –
Initiates a DTE
Loopback.
– testLoopPLB(1) – A
Telco-initiated Payload
Loopback is active on
the interface (DSX-1
only).
– testLoopRLB(5) –
Initiates a Remote
Loopback.
ifIndex (RFC 1573)
ifAdminStatus (RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
ifTestType (RFC 1573)
The following objects
control tests in
SNMP-managed devices:
– noTest(0) – Stops the
test in progress.
– testLoopDCLB(3) –
Initiates a Data
Channel Loopback.
– testLoopDTLB(3) –
Initiates a DTE
Loopback.
– testLoopRLB(5) –
Initiates a Remote
Loopback.
– testSendDCLBUp(9) –
Initiates a Data
Channel Loopback Up
message.
– testSendDCLBDown(10)
– Initiates a Data
Channel Loopback
Down message.
Possible Cause
T
enterpriseTestStart – Any
one of the following tests is
active on the interface:
– DTE Loopback
– Repeater Loopback
– Telco Payload Loopback
(DSX-1 only)
T
enterpriseTestStop – No
tests currently running on the
interface.
T
enterpriseTestStart – Any
one of the following tests is
active on the interface:
– Data Channel Loopback
– DTE Loopback
– Repeater Loopback
T
enterpriseTestStop – No
tests currently running on the
interface.
7900-A2-GB21-20