Paradyne 7974 User Manual page 142

B. Standards Compliance for SNMP Traps
B-6
SNMP Trap Description
enterpriseFallback After a loss of signal, the unit
AutoRate(13) resynchronized to a lower
rate than the last known rate.
Variable bindings:
T
T
T
T
enterprisePrimary- The LTU has recovered and
ClockFailClear(101) is using its primary clock
source.
No variable bindings.
enterpriseSecondary- The LTU has recovered and
ClockFailClear(104) is using its secondary clock
source.
No variable bindings.
enterpriseTest- All tests have been halted.
Stop(105)
Variable bindings:
T
T
T
T
T
enterpriseFallback After an AutoRate fallback
AutoRateClear(113) condition, the unit
resynchronized to the
last known rate.
Variable bindings:
T
T
T
T
December 2001
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
ifTestType (RFC 1573)
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
Possible Cause
Variable line conditions.
—
—
All tests on an interface have
been stopped by timeout or an
Abort All Tests command.
The units automatically
retrained at the same rate, were
reset, or placed in fixed rate.
7900-A2-GB21-20