Paradyne 7974 User Manual page 107

Table A-1. Network Interface Options (2 of 3)
7900-A2-GB21-20
AutoRate
Possible Settings: Enable, Disable
Default Setting: Disable
Determines whether the unit automatically adjusts to the best line rate for conditions, or is
fixed at the rate in the DSL Line Rate field. The automatically set rate cannot exceed DSL
Line Rate.
T
AutoRate is only available when the unit is configured as an LTU.
Enable – The LTU is set to adjust to the best line rate.
Disable – The LTU Line rate is user selectable and is based on the DSL Line Rate
selected.
DSL Line Rate
Possible Settings (Model 7974): 144, 272, 400, 528, 784, 1040, 1552
Default Setting: 1552
Possible Settings (Models 7975, 7976): 144, 272, 400, 528, 784, 1040, 1552, 2064
Default Setting: 2064
Determines the fixed line rate of the LTU when AutoRate is disabled. See
Payload Rates and DSL Line Rates for DSX-1
Line Rates for G.703 for information about maximum payload rates for different DSL line
rates.
T
DSL Line Rate is only available when the unit is configured as an LTU.
144 – 2064 – The fixed DSL Line Rate, in Kbps.
Max DSL AutoRate
Possible Settings (Model 7974): 144, 272, 400, 528, 784, 1040, 1552
Default Setting: 1552
Possible Settings (Models 7975, 7976): 144, 272, 400, 528, 784, 1040, 1552, 2064
Default Setting: 2064
Determines the maximum rate to which the unit can AutoRate. See
Rates and DSL Line Rates for
for G.703, for information about maximum payload rates for different DSL line rates.
T
Max DSL AutoRate is only available when the unit is configured as an LTU and
AutoRate is enabled.
144 – 2064 – The AutoRate ceiling, in Kbps.
December 2001
and Table A-3, Payload Rates and DSL
DSX-1, and Table A-3, Payload Rates and DSL Line Rates
A. Configuration Options
Table A-2,
Table A-2, Payload
A-3