Paradyne 7974 User Manual page 86

8. Testing
8-2
Select . . . On . . .
Network and DSX-1 Model 7974
Tests
Network Tests Model 7975
Network and G.703 Model 7976
Tests
SYNC Data Port Model 7975
Tests
Device Tests All models
Abort All Tests All models
December 2001
To . . .
Start and stop tests on the DSX-1 or network
interface.
Start and stop tests on the network interface.
Start and stop tests on the G.703 or network
interface.
Start and stop tests on the SYNC Port interface.
Start and stop lamp test.
To abort all current tests excluding network-initiated
loopback tests. An aborted test may continue to run
for a few seconds as the abort command is sent to
the remote end and processed.
7900-A2-GB21-20