Paradyne 7974 User Manual page 19

After you enter a valid login ID and password, the Main Menu appears. If you enter
an invalid login ID and password after three attempts, the Telnet session closes or
the terminal connection returns to an idle state. Refer to
Screen
Area
Function Keys
and
Message Area
Entry to all of the Hotwire 797x Standalone Termination Unit's tasks begins at the
Main Menu screen. The four branches of the Main Menu are as follows:
After selecting an option, what appears on the screens depends on the:
T
T
T
7900-A2-GB21-20
main Access Level: Administrator
--------------------------------------------------------------------------------
Ctrl-a to access these functions
Select . . . To . . .
Status View system status, diagnostic test results, statistics, LEDs, and device
identity information.
Test Select and cancel tests for the termination unit's interfaces.
Configuration Display and edit the configuration options.
Control Change the device identity, administer logins, download new firmware, or
initiate a power-on reset of the termination unit.
Current configuration – How your unit is currently configured.
Effective security access level – An access level that is typically set by the
system administrator for each interface and each user.
Data selection criteria – What you entered in previous screens.
December 2001
2. Using the Asynchronous Terminal Interface
MAIN MENU
Status
Test
Configuration
Control
Chapter 6, Security .
Model 797x
Exit
2-3