Network Interface Options Menu - Paradyne 7974 User Manual

A. Configuration Options

Network Interface Options Menu

For Network Interface Options, refer to
To access the Network Interface Options screen, follow this menu selection
sequence:
Table A-1. Network Interface Options (1 of 3)
A-2
Main Menu Configuration
main/config/network
Port Status
Margin Threshold:
Excessive Error Rate Threshold:
AutoRate:
DSL Line Rate:
EIA-530 Payload Rate
Transmit Attenuation
Peer IP Address:
Circuit Identifier:
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
Margin Threshold
Possible Settings: –5db, –4db, –3db, –2db, –1db, 0db, 1db, 2db, 3db, 4db, 5db, 6db,
7db, 8db, 9db, 10db
Default Setting: 0db
Determines the level, expressed in decibels, at which a signal-to-noise margin condition is
recognized.
–5db to 10db – Sets the margin threshold to this value.
Excessive Error Rate Threshold
Possible Settings: 1E–4, 1E–5, 1E–6, 1E–7, 1E–8, 1E–9
Default Setting: 1E–6
Determines the error rate at which an excessive error rate (EER) condition is recognized.
The rate is the ratio of the number of CRC errors to the number of bits received in a
certain period.
December 2001
Table A-1, Network Interface
Current Configuration
NETWORK INTERFACE OPTIONS
Options.
Network
Model: 797x
Enable
–3db
1E–5
Disable
1552 kbps
1536 kbps
0dB
111.255.255.000 Clear
Clear
MainMenu Exit
7900-A2-GB21-20