Product-Related Documents - Paradyne 7974 User Manual

About This Guide
A master glossary of terms and acronyms used in Paradyne documents is
available on the World Wide Web at www.paradyne.com. Select Library
Technical Manuals

Product-Related Documents

Document Number
7900-A2-GN11
8700-A2-GB20
8700-A2-GB25
Contact your sales or service representative to order additional product
documentation.
Paradyne documents are also available on the World Wide Web at
www.paradyne.com. Select Library
viii
Section
Chapter 7, Monitoring and
Troubleshooting
Chapter 8, Testing
Appendix A, Configuration
Options
Appendix B, Standards
Compliance for SNMP Traps
Appendix C, Connectors, Cables,
and Pin Assignments
Appendix D, Technical
Specifications
Index
Technical Glossary.
Document Title
Hotwire TDM SDSL Standalone Termination Units,
Models 7974-A2, 7975-A2, and 7976-A2,
Installation Instructions
Hotwire TDM SDSL Termination Units,
Models 8777 and 8779, User's Guide
Hotwire TDM SDSL Termination Units,
Models 8775 and 8785, User's Guide
December 2001
Description
Describes using the LEDs, status messages, and
network statistics to monitor the unit and detect and
correct problems.
Provides information about available tests and test
setup.
Contains all configuration options, possible settings,
and default settings.
Contains SNMP trap compliance information.
Contains connector and interface information.
Contains physical and regulatory specifications,
network and port interfaces, power consumption
values, and accessory part numbers.
Lists key terms, acronyms, concepts, and sections in
alphabetical order.
Technical Manuals.
7900-A2-GB21-20