Paradyne 7974 User Manual page 136

A. Configuration Options
Table A-14. SNMP Traps Options (2 of 2)
A-32
General Traps
Possible Settings: Disable, Warm, AuthFail, Both
Default Setting: Both
Determines which SNMP traps are sent to each trap manager.
Disable – No general trap messages are sent.
Warm – Sends trap message for warmStart events.
AuthFail – Sends trap message for authenticationFailure events.
Both – Sends both trap messages.
Appendix B, Standards Compliance for SNMP Traps
NOTE: Refer to
Enterprise Specific Traps
Possible Settings: Enable, Disable
Default Setting: Disable
Determines if SNMP traps are generated for enterprise-specific events.
Enable – SNMP traps are generated for enterpriseSpecific events.
Enterprise-Specific Traps
NOTE: Refer to
SNMP Traps .
Disable – No enterprise-specific event traps are sent.
Link Traps
Possible Settings: Disable, Up, Down, Both
Default Setting: Both
Determines if SNMP traps are generated for link up and link down for one of the
communication interfaces.
Disable – No linkUp or linkDown SNMP traps are generated.
Up – A linkUp trap is generated when the unit recognizes that one of the communication
interfaces is operational.
Down – A linkDown trap is generated when the unit recognizes a failure in one of the
communication interfaces.
Both – Sends trap messages for detection of both linkUp and linkDown .
linkUp and linkDown
NOTE: Refer to
Traps .
Link Traps Interfaces
Possible Settings: Network, [DSX-1, SYNC, or G.703], All
Default Setting: All
Determines if the SNMP linkUp , SNMP linkDown , and interface-related enterpriseSpecific
traps are generated for the network interface, DTE port, or both. Depending on the model,
the DTE option appears as DSX-1, SYNC, or G.703.
Network – SNMP trap messages are generated for the network interface.
DSX-1, SYNC, or G.703 – SNMP trap messages are generated for the DTE port.
All – SNMP trap messages are generated for the network interface and the DTE ports.
December 2001
in Appendix B, Standards Compliance for
in Appendix B, Standards Compliance for SNMP
.
7900-A2-GB21-20