Table of Contents
Advertisement
About This Guide
Purpose and Audience
Guide Summary
5100-A2-GB22-10
This guide describes how to install and run diagnostics on the 5170 Remote
Termination Unit (RTU). The guide is written for users of the HotWire 5100 Digital
Subscriber Line (DSL) Access System.
Section
Description
Chapter 1
About HotWire 5100 DSL Access System. Provides a
high-level overview of the operation of the HotWire 5100 DSL
Access System, an overview of the HotWire 5170 RTU, and
the hardware and software requirements.
Chapter 2
Installation. Describes how to install the RTU and Diagnostic
Utility.
Using the HotWire Diagnostics Utility. Describes how to use
Chapter 3
the HotWire Diagnostics Utility.
LEDs. Provides the LED descriptions.
Appendix A
Pin Assignments. Provides the pinouts used for the interface
Appendix B
connectors at the rear of the RTU.
Technical Specifications. Provides the specifications for the
Appendix C
RTU.
Glossary
Defines acronyms and terms used in this document.
Index
Lists key terms, acronyms, concepts, and sections in
alphabetical order and provides page references.
April 1997
iii
Advertisement
Table of Contents
