Paradyne 7974 User Manual page 124

A. Configuration Options
Table A-9. Communication Port Options (3 of 3)
A-20
Port Access Level
Possible Settings: Administrator, Operator
Default Setting: Administrator
Specifies the highest level of access allowed when accessing an ATI session through a
Telnet session.
T
Port Access Level only appears when Port Use is set to Terminal.
Administrator – This is the higher access level, permitting full control of the unit. Access
level is determined by the Login ID. If Telnet Login Required is disabled, the session
access level is Administrator.
Operator – This is the lower access level, permitting read-only access to status and
configuration screens.
Inactivity Timeout
Possible Settings: Enable, Disable
Default Setting: Disable
Provides automatic logoff of a Telnet session.
T
Inactivity Timeout only appears when Port Use is set to Terminal.
Enable – The terminal session terminates automatically after the Disconnect Time.
Disable – A terminal session is never closed due to inactivity.
Disconnect Time (Minutes) (Terminal Use Only)
Possible Settings: 1 – 6
Default Setting: 5
Number of minutes of inactivity before the session terminates automatically. Timeout is
based on no keyboard activity.
T
Disconnect Time (minutes) only appears when Port Use is set to Terminal and
Inactivity Timeout is enabled.
1 – 60 – The session is closed after the selected number of minutes.
December 2001 7900-A2-GB21-20