D1 (Dio1/Adc1/Th_Spi_Attn Configuration); D2 (Dio2/Adc2/Th_Spi_Clk Configuration) - Digi XBee3 DigiMesh 2.4 User Manual

AT commands
Parameter
0
1
2
3
4
5
Default
1

D1 (DIO1/ADC1/TH_SPI_ATTN Configuration)

Sets or displays the DIO1/ADC1/TH_SPI_ATTN configuration (Micro pin 30/SMT pin 32/TH pin 19).
Parameter range
SMT/MMT: 0, 2 - 5
TH: 0 - 5
Parameter
0
1
2
3
4
5
Default
0

D2 (DIO2/ADC2/TH_SPI_CLK Configuration)

Sets or displays the DIO2/ADC2/TH_SPI_CLK configuration (Micro pin 29/SMT pin 31/TH pin 18).
Parameter range
SMT/MMT: 0, 2 - 5
TH: 0 - 5
Digi XBee3® DigiMesh 2.4 RF Module User Guide
Description
Disabled
Commissioning Pushbutton
ADC
Digital input
Digital output, low
Digital output, high
Description
Disabled
SPI_ATTN for the through-hole device
N/A for the surface-mount device
ADC
Digital input
Digital output, low
Digital output, high
I/O settings commands
144