D1 (Dio1/Adc1/Th_Spi_Attn Configuration); D2 (Dio2/Adc2/Th_Spi_Clk Configuration) - Digi XBee 3802.15.4 User Manual

AT commands
Set the parameter value to the number of button presses that you want to simulate. For example,
send CB1 to perform the action of pressing the Commissioning Pushbutton once.
Parameter range
1, 4
Parameter Description
Keeps device awake for 30 seconds.
1
Restore defaults (equivalent to sending an
4
Default
N/A

D1 (DIO1/ADC1/TH_SPI_ATTN Configuration)

Sets or displays the DIO1/ADC1/TH_SPI_ATTN configuration (Micro pin 30/SMT pin 32/TH pin 19).
Parameter range
SMT/MMT: 0, 2 - 5
TH: 0 - 5
Parameter
0
1
2
3
4
5
Default
0

D2 (DIO2/ADC2/TH_SPI_CLK Configuration)

Sets or displays the DIO2/ADC2/TH_SPI_CLK configuration (Micro pin 29/SMT pin 31/TH pin 18).
Parameter range
SMT/MMT: 0, 2 - 5
TH: 0 - 5
Digi XBee® 3 802.15.4 RF Module User Guide
I/O settings commands
RE (Restore Defaults)).
Description
Disabled
SPI_ATTN for the through-hole device
N/A for surface-mount device
ADC
Digital input
Digital output, low
Digital output, high
157