Battery Xbat 24 (J12); Power Supply 36 V; J13; Beam Lights 36 V - FAAC B680H Operating Instructions Manual

BATTERY XBAT 24 (J12)

J12
Connect the emergency battery to this connector.

POWER SUPPLY 36 V

J13

Pre-wired connector, used for powering the board.
i
The installer must connect the earth terminal to the
system earth during electrical connection operations.
"

BEAM LIGHTS 36 V

BLR
GND
BLG
The rope light indicates that the beam is moving. The
operation can be configured using parameters
o6
and the light intensity via parameters
in expert programming mode.

ENCODER (J17)

J17
The encoder wire is connected to connector J17 in
the factory.
i
The encoder must always be connected in order for the
automation system to operate.

INTEGRATED FLASHING TRAFFIC LIGHT (J18)

The integrated flashing traffic light should be con-
nected to connector J18.
B680H
RED
BLACK
BLACK
BLUE
"
(J13)
RED
BLACK

(J16)

J16
o5
dG
and
J18

SIMPLY CONNECT (M1 - M1A - M2)

Example with XMB module
Insert the module into the dedicated plug connectors
and install the Simply Connect PRO app.
i
When programming is taking place via Simply Connect,
programming from the board is inhibited.
and
dr
27
M2 M1A
M1
732719 - Rev.E