Operating Logics; Automatic Logics - FAAC B680H Operating Instructions Manual

5.3 OPERATING LOGICS

In all the logics:
- the STOP command has priority and stops the
automation from operating
- the EMR command has priority and opens the
automation
- if no devices are engaged, a CLOSE pulse causes
the automation to close

■ Automatic logics:

A
- - Automatic
A1
-
- Automatic 1
PA
- - Automatic Parking
CA
- - Automatic Condominium
■ Semi-automatic logics:
E
- Semi-automatic E
P
- - Car park
Cn
- - Condominium
■ Dead-man logic:
C
- - Dead-man
■ Logic CU - Custom
When a default logic is customized in expert program-
ming mode, a CU - custom logic is created.
B680H
AUTOMATIC LOGICS
In all automatic logics, the OPEN and LOOP1 com-
mands:
- with the beam closed, open and close the automa-
tion automatically after a pre-set pause time
- reverse to open during closing
A
■
- Automatic
If the Photocell / LOOP2 is triggered:
- during the pause, it reloads the pause time
- during closing, it reverses to open and closes again
after the pause time
A1
■
- Automatic 1
If the Photocell / LOOP2 is triggered:
- during opening, when the movement has ended
and when released, it closes the automation
- during closing, it reverses to open. When the
movement has ended and when released, it closes
the automation
PA
■
- Automatic Parking
If the Photocell / LOOP2 is triggered:
- during closing, it stops the movement. When
released, it continues to close
If LOOP2 is triggered:
- during opening, when the movement has ended
and when released, it closes the automation
CA
■
- Automatic Condominium
If the Photocell is triggered:
- during closing, it reverses to open and closes again
after the pause time
If LOOP2 is triggered:
- during opening, when the movement has ended
and when released, it closes the automation
- during closing, it reverses to open. When the
movement has ended and when released, it closes
the automation.
40 732719 - Rev.E