Table of Contents
Advertisement
7.4 SIMPLY CONNECT
i
Simply Connect requires B680H firmware version FW
4.0 or later.
When programming is taking place via Simply Connect,
programming via the board is inhibited.
With reference to 33:
1. With the board disconnected from the power
supply, insert the module into the dedicated plug
in connectors.
2. Power up the board and check the signalling LEDs
of the module (see instructions).
3. In basic programming, Simply connect function,
] [
enable channel 1 (
4. Install the Simply Connect PRO app.
7.5 INTEGRATED TRAFFIC LIGHT
With reference to 34 :
1. Remove the door from the cabinet and remove the
cover A by unscrewing the Allen screws B.
2. Remove the support C from the cover A by unscrew-
ing the Allen screws D.
3. Attach the support E with the integrated lights to
the cover by screwing the Allen screws D.
4. Connect the wire to terminal J18.
5. Select the operating mode (function
vanced programming).
6. Reassemble the unit and make sure that the device
is working properly.
1
D D
B
B680H
= 1).
o7
in Ad-
C
D
A
Example with XMB module
M2
M1
www.faacsimplyconnect.com
2
B
51
M1A
E
D D
D
A
732719 - Rev.E
33
34
Advertisement
Table of Contents
