Topping Up The Oil; Periodic Replacements - FAAC B680H Operating Instructions Manual

 14 Periodic replacements
Component
Control unit
Plunger pistons

10.2 TOPPING UP THE OIL

Operations
Check oil level
Bleed the air
To top up the oil, follow the procedure below:
1. Unscrew the oil filler cap A and remove it.
2. Check the oil level: the oil level must be between
the two marks.
3. If necessary, top up the oil without exceeding the
maximum level.
4. Replace the cap and tighten it.
i
Only use oil supplied by FAAC for topping up.
B680H
Frequency in work cycles
2000000
2000000
Frequency/months
6
If necessary
A
MAX
A
MIN
62
4 1
732719 - Rev.E