Table of Contents
Advertisement
9.4 ERROR CODES AND ALARMS
The current notifications can be viewed on the B680H display (e.g.
Er 07 16
tions e.g.
):
- when the board is not in the programming menus, press
12 Errors and alarms
Error (number on white background) - Alarm (number on grey background)
00
No warnings
04
Accessories power supply fault
07
Motor Fault
16
Encoder failure
18
Access breakout
20
Failsafe test failed
24
Consecutive obstacles in closing
32
Movement time-out
35
BUS 2easy device fault/conflict
36
Short circuit/overload on BUS 2easy
39
SETUP incorrect/missing
44
Emergency input active
60
Maintenance request
61
Beam obstacle detected
65
SETUP in progress
90
Programming in progress
B680H
Er 07
+ +
and - - at the same time.
Check the accessories connection for short circuits. Check the current drawn
by the connected accessories and that maximum indicated load is not excee-
ded. Switch the power off and on again. If the problem persists, replace the
control board.
Motor disconnected or short-circuited. Check the wiring. If the problem
persists, replace the motor.
Make sure that the encoder is connected properly. If the problem persists,
replace the encoder.
Access breakout. Re-arm the beam.
Device Failsafe test failed. Check the connections, programming, and that the
safety devices are working correctly.
The maximum number of consecutive obstacles in closing has been rea-
ched. Remove the obstacle. If the problem persists, repeat the SETUP.
The movement is in timeout. Check the manual release. If the problem
persists, replace the board or motor.
Check the addresses of the devices.
Check the connections of the BUS 2easy devices that are connected and
registered.
Perform SETUP.
Check the emergency input.
Scheduled maintenance should be carried out.
An obstacle that prevents the beam from moving has been detected. Remove
the obstacle.
SETUP is in progress. The notification remains as long as the phase is in progress.
Programming is being carried out via Simply Connect.
59
, or multiple notifica-
+
F
+
-
+
732719 - Rev.E
Advertisement
Table of Contents
