Table of Contents
Advertisement
11. INSTRUCTIONS FOR USE
It is the responsibility of the machine installer/
manufacturer to draft the user instructions of the au-
tomation in accordance with the Machinery Directive,
including all the required information and instructions
based on the characteristics of the automation.
The guidelines below, which are purely indicative and
in no way exhaustive, help the installer draft the user
instructions.
!
The installer must provide the owner/operator of the
automation with the EC Declaration, the system Logbook
with the maintenance schedule and the user instructions
of the automation.
The installer must inform the owner/operator of any
residual risks and the intended use and ways in which
the machine should not be used.
The owner is responsible for operating the automation
and must:
- comply with all User instructions provided by the
installer/maintenance technician and the Safety recom-
mendations
- keep the user instructions
- have the maintenance schedule implemented
- keep the system Logbook, which must be completed
by the maintenance technician at the end of all servicing
B680H
11.1 SAFETY RECOMMENDATIONS
The plants made with FAAC buried actuators B680H
series are intended for vehicular traffic.
The user must be in good physical and mental health
and be aware of and responsible for the dangers which
use of the product can lead to.
- Do not use the automation unless the area of
operation is free of persons, animals or objects.
- Do not enter/remain in the area of operation of the
automation while it is moving.
- Do not allow children to approach or play in the
area of operation of the automation.
- Do not try to prevent the movement of the au-
tomation.
- Do not climb, hold onto or let yourself be pulled
along by the beam.
- Do not allow the control devices to be used by
anyone who is not specifically authorised and
trained to do so.
- Do not allow the control devices to be used by
children or persons with mental and physical de-
ficiencies unless they are supervised by an adult
who is responsible for their safety.
- Do not use the automation if there are faults that
could compromise safety.
- Do not expose the automation system to corrosive
chemical or atmospheric agents; do not expose the
automation to water jets of any type or size.
- Do not perform any work on the components of
the automation.
Risk of cutting, crushing or losing fingers or a hand be-
tween the beam and the cabinet when the beam is
moving. Do not approach the barrier, do not put your
hands in the danger area during movement.
66
732719 - Rev.E
Advertisement
Table of Contents
