Features - Electronic Board E680S; Technical Data - FAAC B680H Operating Instructions Manual

FEATURES - ELECTRONIC BOARD E680S:

■ Switching power supply
The switching power supply reduces power consump-
tion in stand-by mode, keeps the output voltage stable
even in the event of fluctuations in the mains supply
and works over a wide range of input voltages.
■ Display with programming buttons
There are three menus for programming from the
board, via the display and dedicated buttons: BASIC,
ADVANCED and EXPERT. The board is also designed
to be programmed remotely via Simply Connect.
■ Simply Connect
A cloud platform that allows remote communication
with the automation, with specific modes for the in-
staller or user. The Simply Connect system requires
a connectivity module (accessory) to plug in to the
electronic board, which is chosen according to the
technology to be used (Wi-Fi, LAN, GSM).
■ BUS 2easy connection
FAAC BUS 2easy devices (photocells and control de-
vices) can be connected.
B680H

Technical data

 1
Power supply
100-240 V~ 50/60 Hz
voltage
Brushless 36 V "
Electric motor
Max power 240 W
Speed 60°/s (S beam 2.3 m) - 15°/s (L beam 8.3 m)
Use frequency Continuous use
Ambient operating
-15 °C to +65 °C
temperature
Protection rating IP 56
Dimensions
469 x 279 x 1100 mm
(L x D x H)
Weight 70 kg
FAAC foundation plate
Dimensions (L x H)
FAAC beam
Maximum length S beam
Maximum length L beam
9
B680H
470 x 280 mm
Beam length
5.3 m
8.3 m
732719 - Rev.E
7