Appendix A: European Union Directives (Ce); European Union (Eu) Directives; Member Countries - Automation Direct DL205 Manual

A–2
European Union Directives

European Union (EU) Directives

Member Countries

Applicable
Directives
Compliance
DL205 Installation and I/O Manual, Rev. B
NOTE: The information contained in this section is intended as a guideline and is
based on our interpretation of the various standards and requirements. Since the
actual standards are issued by other parties and in some cases Governmental
agencies, the requirements can change over time without advance warning or notice.
Changes or additions to the standards can possibly invalidate any part of the
information provided in this section.
This area of certification and approval is absolutely vital to anyone who wants to do
business in Europe. One of the key tasks that faced the EU member countries and
the European Economic Area (EEA) was the requirement to harmonize several
similar yet distinct standards together into one common standard for all members.
The primary purpose of a harmonized standard was to make it easier to sell and
transport goods between the various countries and to maintain a safe working and
living environment. The Directives that resulted from this merging of standards are
now legal requirements for doing business in Europe. Products that meet these
Directives are required to have a CE mark to signify compliance.
Currently, the members of the EU are Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain,
Sweden, and the United Kingdom. Iceland, Liechtenstein, and Norway together with
the EU members make up the European Economic Area (EEA) and all are covered
by the Directives.
There are several Directives that apply to our products. Directives may be amended,
or added, as required.
S
Electromagnetic Compatibility Directive (EMC) — this Directive
attempts to ensure that devices, equipment, and systems have the
ability to function satisfactorily in their electromagnetic environment
without introducing intolerable electromagnetic disturbance to anything
in that environment.
S
Machinery Safety Directive — this Directive covers the safety aspects
of the equipment, installation, etc. There are several areas involved,
including testing standards covering both electrical noise immunity and
noise generation.
S
Low Voltage Directive — this Directive is safety related and covers
electrical equipment that has voltage ranges of 50–1000VAC and/or
75–1500VDC.
S
Battery Directive — this Directive covers the production, recycling, and
disposal of batteries.
Certain standards within each Directive already require mandatory compliance,
such as the EMC Directive, which has gained the most attention, and the Low
Voltage Directive.
Ultimately, we are all responsible for our various pieces of the puzzle. As
manufacturers, we must test our products and document any test results and/or
installation procedures that are necessary to comply with the Directives. As a
machine builder, you are responsible for installing the products in a manner which
will ensure compliance is maintained. You are also responsible for testing any
combinations of products that may (or may not) comply with the Directives when
used together.