Cpu-Slot Controllers - Automation Direct DL205 Manual

1–4
Getting Started

CPU-slot Controllers

DL205 Installation and I/O Manual, Rev. B
There are currently six "base controllers" or "I/O controllers" available for the DL205.
Five of the six require connection to a PC running PC-based Control software. The
sixth contains the CPU and operating system onboard the module.
The four controllers currently available are:
S
Ethernet Base Controller
−
H2–EBC
−
H2–EBC–F
S
Profibus Slave Base Controller
−
H2–PBC
S
DeviceNett Slave
−
F2–DEVNETS–1
S
Smart Distributed Systemt Slave
−
F2–SDS–1
S
WinPLC
−
H2–WPLCx–xx
Of the controllers listed, only the WinPLC is a stand-alone controller with its control
software loaded in non-volatile memory onboard the module.
H2–EBC–F
H2–EBC
F2–DEVNETS–1
H2–PBC
F2–SDS–1 H2–WPLCx–xx