The Remotes - Handicare Freecurve Technical Manual

15 |

The remotes

The lift does not move and the LED in the remote control does not illuminate upon operation
• The remote control batteries are flat, do not make contact or have been inserted the
wrong way round
•
The child lock is activated (press and hold both buttons for 3 seconds)
The lift does not move and the LED in the remote control illuminates upon operation
• The range of the remote is insufficient. Install a repeater
•
The remote control is not linked to the lift
The lift passes the extra charge point without stopping
•
This is correct if a lift is called
•
If this happens when the lift is sent away, the remote controls have been interchanged
The LED on the remote control flashes upon operation
• See the section the LED flashes upon joystick operation in one or both directions
The LED on the remote control flashes when not in use
•
The lift is not on top of a charging station or has problems with charging
78