Handover/Approval - Handicare Freecurve Technical Manual

30 |

Handover/approval

The Freecurve stairlift applies:
•
Machine directive 2006/42/EC
•
Low voltage directive 2014/35/EC
•
EMC-directive 2014/30/EC
Handicare has the next certificates for the Freecurve Van Gogh / Rembrandt / Vermeer:
•
Type approval: NL 99-400V-1001-015-06
•
ASME approval: NA12-0842-1004-012-01
• TÜV certificate
On behalf of this information an approval on site is not necessary.
Handicare has made a risk analysis and a technical construction file. Due to confidential information,
this will not be published.
Because the chairlift complies with the machine directive and is type approved, it is not permitted to
make any changes on the chairlift, which affects the safety, the construction and/or the functionality of
the chairlift.
A certified engineer shall install the chairlift with original parts according to the delivered installation
manual.
Handover procedure by the engineer:
• Fulfil checks according to the checklist 11P00394.
•
Show the functions and the safety aspects of the stairlift to the user.
•
Sign instructed person declaration by both the engineer and the customer.
•
Note the project number and date of installation on the declaration of conformity.
•
After approval the CE sticker is put on the stairlift by the engineer.
•
Handover the user manual and the key to the user.
Checklist
One form is for the user, the other form shall be returned to Handicare. This can be done digitally by
scanning or making a photo of the form.
Handover / approval
Type approval certificate
Technical manual
57