Tap To Floor - Handicare Freecurve Technical Manual

Handicare Freecurve
Tap to fl oor
15 |
Service instructions:
Video tap to fl oor
30
The Tap2Floor
•
Stairlift runs on joystick without stopping on any charge/
stop point after tapping (standard).
•
Stairlift with powered swivel can swivel automatic on a
preferent intermediate landing after tapping (not in
combination with turn & go).
•
Before the start of the lift, the joystick (not the remote
control) is operated in the direction of travel (Tap).
The number of operations (taps) indicates the desired fl oor.
•
Tapping is: pressing the joystick in the desired direction and
releasing it quickly and pressing it again, etc. The LAST
press (when holding the joystick to start driving) is NOT
counted as a tap!!
•
Tapping must be done rather quickly. After each tap you
hear a beeping sound. If it is done too slow it will not work,
it will be ignored and treated as a normal drive (without
tapping).
Video tap to fl oor