16
|
Powered swivel
3D-view
As an option the 'tap2floor can be activated'
(see chap. EXTRAS).
The chair position switch is part of both the direction-sensitive safety lines.
The powered swivel option is activated on the data card.
Schematics
Technical manual
The powered swivel chair
•
The powered swivel chair can be mounted on
the Classic/Elegance/Alliance chair.
•
The chair can swivel 45°, 65°, 85° or 90° and
can also ride facing downwards in these
positions. The positions can be changed on site
by the engineer.
•
One-way powered swivel:
Automatic swivel at the top. The end user rides
facing the opposite wall. The chair can swivel
on intermediate landings towards the floor.
•
Two-way powered swivel:
Automatic swivel at the top and the bottom of
the stairs. The end user rides facing
downwards. The chair can swivel on
intermediate landings to a straight position.
There is no overrun required on the top floor.
•
Minimum stairwidth 690 mm for a van Gogh
and 770 mm for a Rembrandt.
•
The chair will automatically swivel to the
straight position on a charge point when
operated by the remote controls.
31