Handicare Freecurve Technical Manual page 63

Rework rails
When a rail does not fi t, this can be caused by mistakes during measuring, producing or installing.
To make a good judgement in case of a wrong rail we like to receive the underneath data which can be
indicated on the installation drawing.
•
On each railpart: the angles of the rail
•
At each inclination the number of degrees that chair tilts forwards or backwards.
•
The total height
•
The horizontal length of all walls
• On the top fl oor: the height from the top of the rail to the fl oor (standard 235 mm)
Additional photos or video are mandatory.
Rail request form
Rail request form
Technical manual
63