The Hinge - Handicare Freecurve Technical Manual

12 |

The hinge

The resistance on the hinge contacts is 470 Ω when the motor is in the endposition.
The resistance on the hinge contacts is 15 Ω when the motor is not in the endposition.
Ride the litt to a charge contact
The lift does not charge when it is on a charge contact
The problem is in the unit
•
Wire break between K3-7/K7-2 and the carbon brush
•
Wire break between K3-8/K8-2 and the carbon brush
•
Earth short at K3-7, K3-8
The lift does charge when on a charge contact
The problem is in the rail
•
No contact between carbon brush and hinged rail contact
•
Jack plug in the rail has loosened
•
Wire break in the cables from the folding hinge contact on the rail (dtirhee mctly)ot or can be
tested by putting 24V= on the hinged motor
76