10
|
Safety edges
Two direction-sensitive safety edges and one general safety edge have been included in the stairlift.
The direction-sensitive safety edges
The general safety edge
The general safety edge prevents the lift from moving further in both directions. The LED on the armrest
flashes when the joystick is moved in either direction if the safety edge is obstructed.
The following switches have been included in the general safety edge:
•
Seat position switch
•
Tilt switch
•
Emergency switch
•
Key operated switch
•
Final limit switch
The direction-sensitive safety edge prevents the lift from moving further
in the direction that is blocked. However, the lift can still be moved in the
opposite direction to remove the block. To indicate a fault, the LED on the
armrest is dim, but starts to flash when the joystick is moved in the
direction that is blocked.
The following switches have been included in the direction–sensitive
safety edge:
•
Footrest switch
•
Direction switches for the unit
Technical manual
23
Need help?
Do you have a question about the Freecurve and is the answer not in the manual?
Questions and answers