Handicare Freecurve
34
|
Rework-procedure
This procedure is meant for applying a rework.
You can get an RA-number for a rework by contacting dealer support. Always mention this number on the
outside of the returned rail parts.
Return only the rail parts, without supports, charge points, folding hinge motors, joints etc.
New rail parts will not have the alignment blocks.
Video installing joint without
alignment blocks
Folding hinge
The folding hinge section comes with a standard length of domex, and shall be cut to length by the
engineer during installation.
62
Reworked rail sections do not have rail alignment blocks so it is
best to use pincers in the same way as you would when installing
rails without alignment blocks.
Joint