2_Description; Introduction; General Indications; Instructions Purpose And Content - Tecnosystemi HI-TECH PUR 4.0 User Manual

2_DESCRIPTION

2.1 INTRODUCTION

A heat recovery unit is an essential component of residential controlled mechanical ventilation systems. These
systems represent the most efficient solution from an energy point of view to guarantee adequate ventilation of
the internal environments.
The functioning of a heat recovery unit, with a crossed flow exchange pack, is based on the use of a dedicated
heat exchanger which allows recovery of the thermal energy of the extracted air which, otherwise, would be
dispersed outside.
In this way, energy consumption for space heating or cooling is significantly reduced, while ensuring a high level
of indoor air quality.
The exhaust air of the internal environments is expelled from the building, while the fresh and clean air from the
outside is filtered and introduced inside the building. This process ensures adequate ventilation of the internal
environments, while reducing heat dispersion.
This manual contains a detailed description of the technical specifications of the HI-TECH PUR 4.0 recovery units,
the instructions for its operation, installation and assembly, as well as the technical data.
It is advisable to carefully follow all the instructions provided in this manual to ensure:
• the reduction or elimination of any unforeseen faults;
• an improvement in the performance of the components, with consequent energy savings;
• an increase in the durability of the constituent elements and of the entire unit;
• a reduction in maintenance costs.

2.2 GENERAL INDICATIONS

This manual was created to ensure correct installation, set-up and maintenance of the machine. The company
assumes no contractual or non-contractual responsibility for damage to persons, animals or goods caused by
installation, adjustment, maintenance or improper use errors. Any use other than that specified does not commit
the manufacturer in any way.
It should be noted that this documentation is provided for informational purposes only and does not constitute a
binding contract for third parties. The company undertakes to continuously improve and develop its products and
reserves the right to make changes to specifications, fittings and documentation at any time, without notice and
without the obligation to update the versions already delivered.
These instructions for use and installation of the product can be downloaded from and are available on the website
www.tecnosystemi.com or can be requested at the e-mail address assistenza@tecnosystemi.com, indicating the
model and serial number of the device.
2.3 PURPOSE AND CONTENT OF THE INSTRUCTIONS
These instructions provide essential information for installing, using, testing and maintaining the machine. They
have been drawn up in compliance with the European Union regulations and with the technical standards in force
at the time of their publication.
Please observe the local safety regulations during installation. These instructions include indications to prevent
improper use of the machine in a reasonably foreseeable manner.
2.4 STORAGE OF THE INSTRUCTIONS
The current manual and the wiring diagram of the unit must be carefully stored in a suitable place, protected
from dust and humidity, and easily accessible to users and operators for any future consultation. The instructions
must always be supplied with the machine for its entire life cycle and, consequently, must be passed on to any
subsequent potential user.
2.5 UPDATED INSTRUCTIONS
We always recommend checking that the instructions are updated to the latest revision available. Any updates
sent to the customer should be attached to this manual.
Our company is available to provide any information regarding the use of our products.
40