2.3.1 Mounting The Device On A Din Rail - Siemens SIMATIC NET RUGGEDCOM RSG920P Equipment Manual

Installing the Device
2.3.1 Mounting the Device on a DIN Rail
2.3.1 Mounting the Device on a DIN Rail
The RUGGEDCOM RSG920P can be ordered with a DIN rail adapter preinstalled on the
back of the chassis. Use the adapter to mount the device to a standard 35 mm (1.4
in)IEC/EN 60715 or TS35 DIN rail.
Mounting the Device
To mount the device to a DIN rail, do the following:
1.
2.
10
Secure the DIN rail bracket to back of the device chassis.
DIN Rail Bracket
1
Screw
2
Figure 2.1 DIN Rail Bracket Assembly
Hook the top teeth of the adapter onto the DIN rail.
Note
The adapter features a sliding release with a slot at the bottom for a flathead
screwdriver.
1
1
2
2
DIN Rail
1
1
2
1
3
RUGGEDCOM RSG920P
Equipment Manual, 10/2023, C79000-G8976-1172-09