Certification; Approvals; Ukca; Tüv Süd - Siemens SIMATIC NET RUGGEDCOM RSG920P Equipment Manual

Certification

The RUGGEDCOM RSG920P device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
6.1

Approvals

This section details the standards to which the RUGGEDCOM RSG920P complies.
Note
All relevant certificates and test reports are available on
Support
6.1.1

UKCA

This device is certified for use in Great Britain and bears the United Kingdom Certified
Assessed (UKCA) marking. The marking is printed on the body of the device.
6.1.2 TÜV SÜD
This device is certified by TÜV SÜD to meet the requirements of the following
standards:
•
•
6.1.3

European Union (EU)

This device is declared by Siemens Canada Ltd. to comply with essential
requirements and other relevant provisions of the following EU directives:
RUGGEDCOM RSG920P
Equipment Manual, 10/2023, C79000-G8976-1172-09
[https://support.industry.siemens.com/cs/ww/en/ps/16008/cert].
CAN/CSA-C22.2 NO. 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National standard, with UL 62368-1)
UL 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements)
Siemens Industry Online
6
37