Siemens SIMATIC NET RUGGEDCOM RSG920P Equipment Manual page 33

Device Management
3.3 Inserting/Removing the MicroSD Card
2.
3.
4.
5.
6.
24
MicroSD Card
1
Access Plate
2
Figure 3.3 Inserting/Removing a MicroSD Card
When removing the card, first press the card in until it springs back.
Without touching the contacts on the card, insert or remove the microSD card.
When installing the card, push the card in until it clicks in place.
Install the access plate and tighten the retention screw.
Power up the device.
1
Equipment Manual, 10/2023, C79000-G8976-1172-09
2
RUGGEDCOM RSG920P