Oil Pressure Indicator Goes Off And Engine Speed Is Limited - HONDA marine BF115J Owner's Manual

Hide thumbs Also See for BF115J:
Table of Contents

Advertisement

TAKING CARE OF UNEXPECTED PROBLEMS
5. Install a new fuse by tightening two
5 mm screws.
ACG FUSE: 100 A
6. Reinstall the junction box lid, and
the engine cover.
7. Reconnect the battery.
A spare fuse is located on the fuse
holder.
Power Harness
1. Stop the engine.
2. Disconnect the battery cable and
the power harness.
3. Open the fuse cover.
4. Pull the old fuse out of the clip with the
fuse puller supplied in the fuse box.
5. Push a new fuse (40A) into the clip.
6. Close the fuse cover.
134
OIL PRESSURE INDICATOR
GOES OFF AND ENGINE
SPEED IS LIMITED
Side-Mount Type
OIL PRESSURE
INDICATOR
(GREEN)
Flush-Mount/Top-Mount Types
(Mechanical wire type)
OIL PRESSURE INDICATOR
(GREEN)
BUZZER
Display assy
LOW OIL
PRESSURE
INDICATOR
(RED)
If using a flush-mount or top-mount
control panel without indicators,
check the indicators displayed on an
NMEA2000-compatible device.
BUZZER
For information about NMEA2000-
compatible device displays, refer to
the display device's manual.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bf140aBf150d

Table of Contents