How To Reset The Hour Counter; Indicators - HONDA marine BF115J Owner's Manual

When ''Periodic Maintenance'' is
indicated:
1. Have the periodic maintenance
performed without delay after
returning to port.
2. Reset the hour counter.
If not reset, the maintenance
indication will remain in the
display, and the hour count until the
next maintenance will be in error.
When the periodic maintenance is
conducted before ''Periodic
Maintenance'' is indicated, reset the
hour counter.
If not reset, the hour count until the
next maintenance will be in error.

How to reset the Hour Counter

1. Be sure to turn OFF the engine
before beginning the reset
procedure. Pull the emergency stop
switch clip out of the emergency
stop switch by pulling the
emergency stop switch lanyard.
2. Put the shift lever in "F" (Forward)
or "R" (Reverse).
3. Turn the ignition switch ON. Do
not start the engine. The buzzer
will sound once.
4. Press the emergency stop switch 5
times within 20 seconds.
When using the control panel without
indicators type, within 20 seconds,
pull and insert the emergency stop
switch clip, or remove the clip and
pull the emergency stop switch 5
times.
The buzzer will sound once
indicating the hour counter is reset.
CONTROLS AND FEATURES

INDICATORS

The indicator lights come on and the
buzzer sounds when you turn the
ignition switch ON, allowing you to
see that they are working. If an
indicator does not light during this
test, it cannot alert you if that system
develops a problem. Have your
Marine dealer check for burned-out
bulbs or other problems. Under
normal conditions, the following
occur when the ignition switch is
turned ON:
1. The ACG, Malfunction, Oil
Pressure, and Overheat indicators
light.
2. The buzzer will beep twice.
3. The Malfunction, Oil Pressure, and
Overheat indicators will go out
after the second beep.
4. The ACG indicator will go out
after the engine starts.
5. The Oil Pressure indicator will
light again after the engine starts
and will stay lit to indicate the oil
pressure is normal.
53