Normal Engine Stopping (Flush-Mount/Top-Mount Types (Dbw Type)) - HONDA marine BF115J Owner's Manual

Side-Mount Type
EMERGENCY STOP
SWITCH
EMERGENCY
STOP SWITCH
LANYARD
EMERGENCY
STOP SWITCH
CLIP
Flush-Mount/Top-Mount Types
(Mechanical wire type)
CONTROL PANEL
EMERGENCY
EMERGENCY
STOP SWITCH
STOP SWITCH
LANYARD
PULL
EMERGENCY STOP SWITCH CLIP
To stop the engine in an emergency,
pull the emergency stop switch clip out
of the emergency stop switch by pulling
the emergency stop switch lanyard.
If the emergency stop switch is activated
while the engine is running, the engine
will shut down abruptly and the boat
will quickly decelerate, potentially
PULL
causing occupants and objects to be
thrown forward and/or overboard.
If the emergency stop switch is
activated, the emergency stop switch
clip must be reinserted before the
engine can be restarted.
We suggest that you stop the engine
this way occasionally to verify that
the emergency stop switch is
operating properly.
Before leaving the dock, check the
operation of the emergency stop switch.
Turn the ignition switch key to the
OFF position after verifying the
emergency stop switch operation.
OPERATION
Normal Engine Stopping
(Flush-Mount/Top-Mount Types
(DBW type))
Flush-Mount Type
N (NEUTRAL)
CONTROL
LEVER
N (NEUTRAL)
Top-Mount Type (DBW type)
N (NEUTRAL)
CONTROL
LEVER
N (NEUTRAL)
75