Table of Contents
Advertisement
SERVICING YOUR OUTBOARD MOTOR
Installation
COVER LOCKS
COVER SIDE
Side
MAIN BODY SIDE
1. Place the engine cover on the main body.
2. Slide the engine cover so that the
cover lock on the cover aligns with
the lock in the main body.
Front
ENGINE COVER LATCH
98
Side
ENGINE COVER LATCH (each side)
3. Push the engine cover until any gap
between the engine cover and main
body is eliminated.
4. Push all the engine cover latches to
lock them.
Lubricate the engine cover rubber
sealing ring with silicone spray to
make installation easier.
The cover should be tight at the
mid-case point. If the cover is loose
or difficult to secure, an adjustment
may be necessary. Please see the shop
manual or your Marine dealer for
adjustment.
Advertisement
Table of Contents
